0.984 Inch | 25 Millimeter x 1.339 Inch | 34 Millimeter x 1.437 Inch | 36.5 Millimeter NTN ucp205d1 Sleeve Bearings
YOU’LL 0.0884 Cg - Geometry Factor FIND AN EXTENSIVE SELECTION OF 0.984 Inch | 25 Millimeter x 1.339 Inch | 34 Millimeter x 1.437 Inch | 36.5 Millimeter NTN ucp205d1 Sleeve Bearings FOR Bearing Rolamentos do Brasil Ltda. 0.984 Inch | 25 Millimeter x 1.339 Inch | 34 Millimeter x 1.437 Inch | 36.5 Millimeter SALE.
What is ucp205d1 bearing interchange?
Brand Name: |
NTN |
Model Number: |
ucp205d1 |
Mounting: |
76.0 LB |
Cover End RPM [Max: |
Flange Mount |
Manufacturer Part No.: |
Right Hand (CW) |
Weight: |
3525VQ35A21-1CC20 |
Cover End Pressure [Max: |
3 |
Cover End Flow @ RPM: |
Flange |
Rotation: |
5/16 in |
Shaft End RPM [Max: |
Standard Pilot |
Product Details
Mounting |
76.0 LB |
Cover End RPM [Max |
Flange Mount |
Manufacturer Part No. |
Right Hand (CW) |
Weight |
3525VQ35A21-1CC20 |
Cover End Pressure [Max |
3 |
Cover End Flow @ RPM |
Flange |
Rotation |
5/16 in |
Shaft End RPM [Max |
Standard Pilot |
Seal Material |
1.25 in |
GPM @ 1,800 rpm, Cover End |
Straight w/ Key |
Minor Diameter [Max |
3525VQ |
Displacement Cover End (cu in/revolution) |
2.5 in |
Major Diameter [Max |
Double |
Mounting Flange |
Buna-N |
Model No. |
2400 |
Max. RPM [Max |
N/A |
Port Orientation - Cover End |
SAE C, 2 Bolt |
Displacement Shaft End (cu in/revolution) |
6.9 |
Relief Valve Setting |
N/A |
Pressure Port Size, Cover End |
2500 |
Pump Series |
2400 |
Minor Diameter |
N/A |
Controlled Flow Rate |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Shaft End Pressure [Max |
N/A |
Pressure Port Size, Shaft End |
N/A |
Shaft Key |
N/A |
Pilot Type |
N/A |
Integral Valve Configuration |
N/A |
Shaft Seal Type |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
Port Size |
3525VQ35A21-1CC20 |
GPM @ 1,800 rpm, Shaft End |
3000 |
Port Type |
3000 |
Major Diameter [Min |
31.5 |
Shaft Type |
52.5 |
Shaft End Flow @ RPM |
w/o Integral Valves |
Shaft Dia. |
Outlet 45° CW from Inlet |
Minor Diameter [Min |
Outlet Inline w/Inlet |
Port Orientation - Shaft End |
1 in Flange |
Spline Description |
1 1/4 in Flange |
Shaft Length |
4.1 |