FAG QJ314-MPA-C3 Angular Contact Ball Bearings
FAG QJ314-MPA-C3 Angular Contact Ball Bearings Needs Analysis Single Row Number of Rows of Rollers , Bearing Rolamentos do Brasil Ltda. 120 °C Max operating temperature, Tmax FAG Bearing 6.91 Hz Characteristic outer ring frequency, BPF0 Manufacturing Service . Get Your Free.
What is QJ314-MPA-C3 bearing cross reference？
| Brand Name: |
FAG |
| Model Number: |
QJ314-MPA-C3 |
| Shaft Seal Type: |
75.0 LB |
| Integral Valve Configuration: |
Flange Mount |
| Rotation: |
Right Hand (CW) |
| Manufacturer Part No.: |
3520V25A14-86AA22R |
| Major Diameter [Max: |
3 |
| Mounting Flange: |
Flange |
| GPM @ 1,800 rpm, Cover End: |
5/16 in |
| Shaft Key: |
Standard Pilot |
Product Details
| Shaft Seal Type |
75.0 LB |
| Integral Valve Configuration |
Flange Mount |
| Rotation |
Right Hand (CW) |
| Manufacturer Part No. |
3520V25A14-86AA22R |
| Major Diameter [Max |
3 |
| Mounting Flange |
Flange |
| GPM @ 1,800 rpm, Cover End |
5/16 in |
| Shaft Key |
Standard Pilot |
| Major Diameter [Min |
1.375 in |
| GPM @ 1,800 rpm, Shaft End |
Straight w/ Key |
| Shaft End Pressure [Max |
3520V |
| Spline Description |
3 7/8 in |
| Pressure Port Size, Cover End |
Buna-N |
| Displacement Shaft End (cu in/revolution) |
1800 |
| Max. RPM [Max |
N/A |
| Pump Series |
SAE C, 2 Bolt |
| Displacement Cover End (cu in/revolution) |
Single Shaft Seal |
| Model No. |
N/A |
| Port Size |
1800 |
| Cover End RPM [Max |
1800 |
| Port Orientation - Cover End |
N/A |
| Shaft Dia. |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Shaft Type |
N/A |
| Port Orientation - Shaft End |
N/A |
| Cover End Pressure [Max |
N/A |
| Minor Diameter |
N/A |
| Seal Material |
N/A |
| Pilot Type |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Minor Diameter [Max |
3520V25A14-86AA22R |
| Pressure Port Size, Shaft End |
3000 |
| Controlled Flow Rate |
2500 |
| Port Type |
21 |
| Weight |
37.5 |
| Mounting |
N/A |
| Shaft Length |
Outlet 135° CCW from Inlet |
| Relief Valve Setting |
Outlet Opposite Inlet |
| Shaft End Flow @ RPM |
3/4 in Code 61 |
| Minor Diameter [Min |
1 1/4 in Code 61 |
| Shaft End RPM [Max |
2.8 |
| Cover End Flow @ RPM |
4.9 |