30,000 mm x 55,000 mm x 13,000 mm NTN 6006lu Sleeve Bearings
Find the discount 30,000 mm x 55,000 mm x 13,000 mm NTN 6006lu Sleeve Bearings online you need . We offer ... If you check out Bearing Rolamentos do Brasil Ltda. our large selection 30,000 mm x 55,000 mm x 13,000 mm of 30,000 mm x 55,000 mm x 13,000 mm NTN 6006lu Sleeve Bearings once .
What is 6006lu bearing cross reference?
Brand Name: |
NTN |
Model Number: |
6006lu |
Model No.: |
76.0 LB |
Pilot Type: |
Flange Mount |
Port Orientation - Shaft End: |
Left Hand (CCW) |
Shaft Seal Type: |
3525VQ38A17-11AA20-LH |
Pressure Port Size, Shaft End: |
3 |
Cover End RPM [Max: |
Flange |
Weight: |
N/A |
Spline Description: |
Standard Pilot |
Product Details
Model No. |
76.0 LB |
Pilot Type |
Flange Mount |
Port Orientation - Shaft End |
Left Hand (CCW) |
Shaft Seal Type |
3525VQ38A17-11AA20-LH |
Pressure Port Size, Shaft End |
3 |
Cover End RPM [Max |
Flange |
Weight |
N/A |
Spline Description |
Standard Pilot |
Integral Valve Configuration |
1.25 in |
Cover End Flow @ RPM |
14 Tooth Splined |
Port Orientation - Cover End |
3525VQ |
Shaft Key |
1 15/16 in |
Shaft End RPM [Max |
Buna-N |
Major Diameter [Min |
2400 |
Shaft End Pressure [Max |
1.04 in |
Displacement Cover End (cu in/revolution) |
SAE C, 2 Bolt |
Displacement Shaft End (cu in/revolution) |
Single Shaft Seal |
Cover End Pressure [Max |
12/24 |
Controlled Flow Rate |
2500 |
GPM @ 1,800 rpm, Cover End |
2400 |
Relief Valve Setting |
N/A |
Pressure Port Size, Cover End |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Shaft Dia. |
1.248 in |
Pump Series |
1.247 in |
Shaft Type |
N/A |
Mounting Flange |
N/A |
Rotation |
N/A |
Port Type |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
Major Diameter [Max |
3525VQ38A17-11AA20-LH |
GPM @ 1,800 rpm, Shaft End |
3000 |
Seal Material |
3000 |
Shaft Length |
25.5 |
Minor Diameter [Max |
57 |
Minor Diameter |
w/o Integral Valves |
Port Size |
Outlet 135° CCW from Inlet |
Max. RPM [Max |
Outlet Opposite Inlet |
Minor Diameter [Min |
1 in Flange |
Mounting |
1 1/4 in Flange |
Manufacturer Part No. |
3.37 |
Shaft End Flow @ RPM |
7.42 |