| Rotation |
50.0 LB |
| Controlled Flow Rate |
Flange Mount |
| Port Orientation - Cover End |
Left Hand (CCW) |
| Mounting Flange |
35VQ25A-11D20-LH |
| Displacement Shaft End (cu in/revolution) |
2 |
| Minor Diameter [Min |
Flange |
| Pressure Port Size, Shaft End |
N/A |
| Seal Material |
20 |
| Cover End Pressure [Max |
25 gpm @ 1200 rpm |
| GPM @ 1,800 rpm, Cover End |
11 |
| Max. RPM [Max |
1.25 in |
| Cover End RPM [Max |
14 Tooth Splined |
| GPM @ 1,800 rpm, Shaft End |
37.5 gpm @ 1800 rpm |
| Spline Description |
35VQ |
| Shaft End Pressure [Max |
1 15/16 in |
| Shaft Dia. |
None |
| Pilot Type |
1 1/4 in Flange |
| Port Orientation - Shaft End |
Buna-N |
| Shaft End Flow @ RPM |
2500 |
| Major Diameter [Min |
3000 psi |
| Model No. |
37 1/2 |
| Displacement Cover End (cu in/revolution) |
A |
| Relief Valve Setting |
SAE C, 2 Bolt |
| Pressure Port Size, Cover End |
Single Shaft Seal |
| Port Type |
90° CW from Inlet |
| Integral Valve Configuration |
35VQ25A-11D20-LH |
| Port Size |
4.98 |
| Shaft Length |
w/o Integral Valves |